|
Computerized Die
Cutting Press And Feeding Systems
 |
USA CP-25
Long
automated incremental feed table |
 |
USA CP-25
Two
axis controlled by servo drives, pneumatic pinch roll infeed, pad with pad
shifter, and touch screen operator interface |
 |
USA CP-25
Die
rotation, inboard and outboard pneumatic pinch roll and conveyor |
-Thumb.jpg) |
USA CP-30
Die
rotation, inboard clamping beam and exit conveyor |
 |
USA CP-70
Die
rotation and inboard and outboard pneumatic pinch rolls |
 |
USA
CP-150
Motorized material uUnwind stand, inboard clamping beam, outboard
pneumatic pinch roll with conveyor and scrap material cut Off |
- Save Material, Reduce
Labor
- Increase Productivity, Extend
Die-Life, Assure Cutting Quality
Advantages
- Two or three axes servo motor position
system guarantees position accuracy of ± 0.2 mm.
- Working capacity of 15,000 to 20,000 cuts
per 8 hours.
- User friendly computer
control.
- 50 cutting program memory for different
die shapes. Cutting program shown on dialog type computer monitor.
- Program and cutting die change within
5 minutes or less.
- Optional auto nesting software is
availible to achieve best material yield through computer auto
nesting.
- Combine with optional feeding system to
obtain automated die cutting systems for high production even with many daily
die changes.
- Material savings up to 20% and
more.
| Model |
Pressure |
Head Size |
Cutting Area |
Motor
Power |
Head Traverse
Speed |
Min.-Max.
Daylight |
Floor Space
D x W x H |
Approx.
Net Wt. |
| USA CP-25 |
25 Tons |
*500 x 500 mm
*19.7" x
19.7"
or more |
*500 x 1800 mm
*19.7" x
70.9"
or more |
3 HP |
1000 mm/sec
39.4"/sec |
30-160 mm
1.9"-6.3" |
700 x 2400 x 2200 mm
27.5"
x 94.5" x 86.6"
or more |
2500 kg
5511 lbs |
| USA CP-30 |
30 Tons |
*500 x 500 mm
*19.7" x
19.7"
or more |
*500 x 1800 mm
*19.7" x
70.9"
or more |
5 HP |
1000 mm/sec
39.4"/sec |
30-160 mm
1.9"-6.3" |
700 x 2400 x 2200 mm
27.5"
x 94.5" x 86.6"
or more |
2700 kg
5952 lbs |
| USA CP-40 |
40 Tons |
*500 x 500 mm
*19.7" x
19.7"
or more |
*500 x 1800 mm
*19.7" x
70.9"
or more |
5 HP |
1000 mm/sec
39.4"/sec |
30-140 mm
1.9"-5.5" |
700 x 2400 x 2200 mm
27.5"
x 94.5" x 86.6"
or more |
3200 kg
7055 lbs |
| USA CP-70 |
70 Tons |
*500 x 500 mm
*19.7" x
19.7"
or more |
*500 x 1800 mm
*19.7" x
70.9"
or more |
7.5 HP |
1000 mm/sec
39.4"/sec |
30-140 mm
1.9"-5.5" |
700 x 2400 x 2200 mm
27.5"
x 94.5" x 86.6"
or more |
4000 kg
8184 lbs |
Dimensions and net weight for machine without
feeder.
Specifications may change without notice.
*Other sizes available upon request.
Also available in
100, 150, and 200 ton capacity.
|
