|
Four Pillar
Hydraulic Die Cutting Presses
FH 3063-70E
70 Ton 4-Pillar Press with Slide Table and 7.1" Stroke
To download a
full-color PDF brochure for this machine, click here
To download a brochure for
this machines foam applications, click here
European engineering for fast, efficient,
and powerful die cutting systems from Associated Pacific Machine Corporation.
APMC - bringing America the best in worldwide diecutting technology.
Range of
Applications
- APMC presses diecut materials such as
foam, textiles, plastic, rubber, packaging, vinyl, leather, composites,
fiberglass, vinyl and carpet floor tiles, cork, wood, gasket materials,
etc...
Advantages
- The USA FH series of die cutting machines
were designed and engineered by European technicians with 50 years of
experience.
- You can be assured that the best and most
up to date engineering technology has been utilized in the USA FH
series.
- The USA FH series has a strong exterior
reinforced construction consisting of heavy duty weldments. This press is built
for the long term which our customers expect.
- This full head press uses a four column
construction, and in the best and strongest American engineering tradition,
utilizes an internal mechanical levelling system to insure a parallel cutting
stroke and full uniform pressure all over the cutting bed, even when the
cutting dies are not in the center of the cutting area. A parallel cutting
stroke is essential for obtaining accurate cut parts and for long pad and die
life. The most important fact is that the four pillar construction and internal
mechanical levelling system keeps the bridge parallel far better than the
common hydraulic levelling or straight arm systems used in some cutting
machines.
- Simple to learn - Easy to use controls
for setting die and material height.
- Low electrical power
consumption.
- Low maintenance due to an automatic
central lubricating system which continuously lubricates all of the main
bushings and bearings.
- Allen Bradley electrical controls are
standard on the USA series.
Accessories
Available
- 10 roll material gantry
- Adjustable die board clamping
device
- Cutting pad shifter
- Automated mechanical stops
- Special feed systems
- Differential die height
control
- Air flotation tables
- Cutting pads
- Vacuum die capability
- Nylon cutting belt
- High speed hydraulic system
Specifications
| Model |
Pressure |
Cutting Area |
Motor
Power |
Stroke |
Maximum
Daylight |
Floor Space |
Net Wt.
Approx. |
| USA FH
2763-40 |
40 Tons* |
700 x 1600 mm
27.5" x 63" (78", 98") |
5 HP |
110 mm
4.3" |
160 mm
6.3" |
2400 x 1200 x 1430
mm
93.3" x 43.3" x 56.3" |
2550 kg
5610 lbs |
| USA FH
3563-60 |
60 Tons* |
900 x 1600 mm
35.4" x 63" (78", 98") |
7.5 HP |
110 mm
4.3" |
160 mm
6.3" |
2500 x 1460 x 1510
mm
98.4" x 57.5" x 59.5" |
4100 kg
9020 lbs |
| USA FHE
3563-70M |
70 Tons* |
760 x 1600 mm
29.9" x 63" (78", 98") |
10 HP |
180 mm
7.1" |
230 mm
9.1" |
2500 x 1300 x
1655mm
98.4" x 51.2" x 65.2" |
4200 kg
9240 lbs |
| USA FH
3563-70 |
70 Tons* |
900 x 1600 mm
35.4" x 63" (78", 98") |
10 HP |
110 mm
4.3" |
160 mm
6.3" |
2500 x 1450 x 1510
mm
98.4" x 57.1" x 59.5" |
4200 kg
9240 lbs |
| USA FH
3563-100 |
100 Tons* |
900 x 1600 mm
35.4" x 63" (78", 98") |
15 HP |
110 mm
4.3" |
160 mm
6.3" |
2500 x 1450 x 1530
mm
98.4" x 57.1" x 60.2" |
6000 kg
13200 lbs |
| USA FH
3563-150 |
150 Tons* |
900 x 1600 mm
35.4" x 63" (78", 98") |
20 HP |
110 mm
4.3" |
160 mm
6.3" |
2800 x 1500 x 1710
mm
110.2" x 59.1" x 67.3" |
8000 kg
17600 lbs |
| USA FH
3563-200 |
200 Tons* |
900 x 1600 mm
35.4" x 63" (78", 98") |
15 HPx2 |
110 mm
4.3" |
160 mm
6.3" |
2800 x 1800 x 1830
mm
110.2" x 70.9" x 72.1" |
9500 kg
20900 lbs |
| USA FH
3563-300 |
300 Tons* |
1500 x 1600 mm
59.1" x 63" (78", 98") |
20 HPx2 |
110 mm
4.3" |
160 mm
6.3" |
2940 x 2690 x 1950
mm
115.8" x 105.9" x 76.8" |
13500kg
29700 lbs |
Bed size available up to 2000 mm (78") x
3000 mm (120"). Daylight can be adjusted to customer's requirements.
Standard daylight is 50 mm or 2" greater than longest stroke. Stroke can be
adjusted between 12 mm (.5") and 110 mm (4.3").
Optional stroke size 180 mm
(7.1") and 250 mm (10").
Specifications may vary without notice
*All
tonnage shown is in metric tons. Add 10% for U.S. tonnage equivalent.
|
