Four Pillar Hydraulic Die Cutting Presses





		Search By Industry (Coming Soon)

Four Pillar Hydraulic Die Cutting Presses
USA-FH3563-100 100 Ton 4 Pillar Press with Automated Slide Table

European engineering for fast, efficient, and powerful die cutting systems.

Range of Applications

APMC presses diecut materials such as foam, textiles, plastic, rubber, packaging, vinyl, leather, composites, fiberglass, vinyl, carpet floor tiles, cork, wood, gasket materials, etc...

Advantages

The USA FH series of die cutting machines were designed and engineered by European technicians with 50 years of experience.
You can be assured that the best and most up to date engineering technology has been utilized in the USA FH series.
The USA FH series has a strong exterior reinforced construction consisting of heavy duty weldments. This press is built for the long term which our customers expect.
This full head press uses a four column construction, and in the best and strongest American engineering tradition, utilizes an internal mechanical levelling system to insure a parallel cutting stroke and full uniform pressure all over the cutting bed, even when the cutting dies are not in the center of the cutting area. A parallel cutting stroke is essential for obtaining accurate cut parts and for long pad and die life.
MOST importantly, the four pillar construction and internal mechanical levelling system keeps the bridge parallel far better than the common hydraulic levelling or straight arm systems used in some cutting machines
Simple to learn - Easy to use controls for setting die and material height.
Low electrical power consumption.
Low maintenance due to an automatic central lubricating system which continuously lubricates all of the main bushings and bearings.
Allen Bradley electrical controls are standard on the USA series.

Accessories Available

10 roll material gantry
Adjustable die board clamping device
Cutting pad shifter
Automated mechanical stops
Special feed systems
Differential die height control
Air flotation tables
Cutting pads
Vacuum die capability

Specifications

Model	Pressure	Cutting Area	Motor Power	Stroke	Down Stroke Speed	Up Stroke Speed	Maximum Daylight	Floor Space	Net Wt. Approx.
USA FH 2763-40	40 Tons*	700 x 1600 mm 27.5" x 63" (78", 98")	5 HP	110 mm 4.3"	140 mm/sec 5.5"/sec	120 mm/sec 4.7"/sec	160 mm 6.3"	2500 x 960 x 1380 mm 98.4" x 37.8" x 54.3"	2700 kg 5952 lbs
USA FH 3563-60	60 Tons*	900 x 1600 mm 35.4" x 63" (78", 98")	7.5 HP	110 mm 4.3"	120 mm/sec 4.7"/sec	100 mm/sec 3.9"/sec	160 mm 6.3"	2500 x 1380 x 1490 mm 98.4" x 54.3" x 58.7"	4150 kg 9149 lbs
USA FH 3563-70	70 Tons*	900 x 1600 mm 35.4" x 63" (78", 98")	7.5 HP	110 mm 4.3"	120 mm/sec 4.7"/sec	100 mm/sec 3.9"/sec	160 mm 6.3"	2500 x 1380 x 1490 mm 98.4" x 54.3" x 58.7"	4150 kg 9149 lbs
USA FH 3563-100	100 Tons*	900 x 1600 mm 35.4" x 63" (78", 98")	15 HP	110 mm 4.3"	100 mm/sec 3.9"/sec	90 mm/sec 3.5"/sec	160 mm 6.3"	2500 x 1380 x 1490 mm 98.4" x 54.3" x 58.7"	6000 kg 13228 lbs
USA FH 3563-150	150 Tons*	900 x 1600 mm 35.4" x 63" (78", 98")	20 HP	110 mm 4.3"	90 mm/sec 3.5"/sec	90 mm/sec 3.5"/sec	160 mm 6.3"	2725 x 1485 x 1710 mm 107.3" x 58.5" x 67.3"	7500 kg 16535 lbs
USA FH 3563-200	200 Tons*	900 x 1600 mm 35.4" x 63" (78", 98")	30 HP	110 mm 4.3"	90 mm/sec 3.5"/sec	90 mm/sec 3.5"/sec	160 mm 6.3"	2725 x 1485 x 1860 mm 107.3" x 58.5" x 73.2"	8700 kg 19180 lbs

Daylight can be adjusted to customer's requirements. Maximum daylight can be adjusted between 1" and 9". Stroke can be adjusted between 1/2" and 4.3". Optional stroke size (180 mm, 7.1") and (250 mm, 10").
Specifications may vary without notice
*All tonnage shown is in metric tons. Add 10% for U.S. tonnage equivalent.

Associated Pacific Machine Corp.
724 Via Alondra
Camarillo, CA 93012, USA
(805)445-4740 (800)679-APMC
Contact Us