Die Cutting Machines Plastic Card Machines Used Machines Parts and Service Die Sharpener Cutting Pads Industry Search

Used Machinery

As of: February 03, 2012
These are the used machines currently available at APMC. Please select any machines you are interested in by clicking on the appropriate check box. Then, fill out your name, email address, company name and phone number including area code at the bottom of the page and click on the submit button.

Special MAAP Technology Equipment Liquidation. Please click here.

Jump to: Traveling Head Hydraulic presses
Jump to: Computerized Traveling Head Hydraulic presses (none available at this time)
Jump to: Full Head Hydraulic presses
Jump to: Receding Head Hydraulic presses
Jump to: High Speed presses
Jump to: Hydraulic Clicker presses
Jump to: Roller Presses
Jump to: Plastic Card Machinery
Jump to: Foam Equipment
Jump to: Other Machinery
Jump to: Leather Working Machinery

 
  Make Model Description Pressure /Quantitty

Traveling Head Hydraulic Presses

Top

Pedersen 285M-25H Traveling Head Press
  • Machine Bed: 25.6" D x 98.4" W (650 x 2500 mm)
  • Cutting Head: 25.6" x 24" (650 x 610 mm)
  • Cutting Stroke: 4.3" (110 mm)
  • Max. Open Daylight: 14.2" (360 mm)
  • Polypropylene Cutting Pad

Note: Machine is currently on rental.



 Pedersen 285M-25H 40 Ton 0
APMC TH2570-25 Traveling Head Press
  • Machine Bed: 25.6" D x 68.9" W (650 x 1750 mm)
  • Cutting Head: 25.6" x 25.6" (650 x 650 mm)
  • Cutting Stroke: 5.1" (130 mm)
  • Max. Open Daylight: 6.1" (155 mm)
  • Polypropylene Cutting Pad




 Image Coming Soon 25 Ton 0

Computerized Traveling Head Hydraulic presses

Top

APMC CP2079-25 3 Axis Computerized Traveling Head Press
  • Factory refurbished.
  • Machine Bed: 25.6" x 78.7" (650 x 2000 mm)
  • Cutting Head: 19.7" x 19.7" (500 x 500 mm)
  • Cutting Stroke: 5.1" (130 mm)
  • Main Motor: 5 HP
  • Cutting Head Driven by Ball Screw and Servo Motor
  • Servo Motor Positioning System
  • Head Rotation
  • Manual Die Mounting Rails Under the Head
  • Polypropylene Cutting Pad and Oscillating Pad Shifter
  • Inboard Pneumatic Pinch Roll Feeding System With 2.4" (60 mm) Max. Opening
  • Outboard Pneumatic Pinch Roll Feeding System with 6.3" (160mm) Max. Opening
  • Industrial PC Based Operator Interface
  • Inboard and Outboard Safety Guards

Note: Available in 60 working days.



 Image Coming Soon 25 Ton 1

Full Head Hydraulic Presses

Top

Pedersen 285M-16 Full Head Press
  • With Mechanical Balancing
  • Machine Bed: 27" D x 63" W (700 x 1600 mm))
  • Cutting Stroke: 4.3" (110 mm)
  • Max. Daylight: 30" (760 mm)
  • Manual Sliding Table
  • Polypropylene Cutting Pad

Note: Available in 5 working days.


 Image Coming Soon 40 Ton 1
APMC FH 3535-60EM 60 Ton Cutting on Paper Belt System

  • Cutting Force : 60 Metric (66 US) Tons
  • Cutting Stroke : 7.1" (180 mm)
  • Effective Cutting Area : 33.5" D x 30.7" W (850 x 780 mm)
  • Click Here for Details


*Brand new and ready for delivery.*


 FH3535-60EM 60 Ton 0
APMC FH 3598-100 Full Head Press with Texabil Feeding System
  • With Mechanical Balancing
  • Machine Bed: 35" D x 98" W (900 x 2500 mm)
  • Cutting Stroke: 4.3" (110 mm)
  • One side 3M long Manual Texabil Feed System
  • Polypropylene Cutting Pad
  • Inboard and Outboard Safety Guards




FHU3598-100 100 Ton 1
Pedersen 601M-16 Full Head Press
  • With Mechanical Balancing
  • Bed Size: 39.4" D x 63" W (1000 x 1600 mm)
  • Cutting Stroke: 4.3" (110 mm)
  • Dual Motorized Slide Table with Dual Die Height Setting Device
  • Polypropylene Cutting Pad Mounted on the Head

Note: Available in 10 working days.


 Image Coming Soon 100 Ton 1
APMC FH3563-150 Full Head Press
  • With Mechanical Balancing
  • Bed Size: 35" D x 63" W (900 x 1600 mm)
  • Cutting Stroke: 4.3" (110 mm)
  • Single Auto Slide Table
  • Frequency Converter Cushioning System
  • Pad and Pad Shifter on the Head

Note: Available in 60 days.


 Image Coming Soon 150 Ton 1

Receding Head Hydraulic Presses

Top

APMC RH2763-40 Receding Head Press
  • Machine Bed 27.6" x 63" (700 x 1600 mm)
  • Cutting Stroke 4.3" (110 mm)
  • Polypropylene Cutting Pad
  • Photocell Safety Protection System



 RH2763-40
 40 Ton 1
APMC RH3979-40* Receding Head Press
  • Machine Bed: 39.4" D x 78.7" W (1000 x 2000 mm)
  • Cutting Stroke: 4.3" (110 mm)
  • Polypropylene Cutting Pad
  • Photocell Safety Protection System
  • Pneumatic Die Mounting Rails Under the Head
  • Relief Valve - For high pressure adjustment

*Note: Machine is on consignment.


 RH3979-40 40 Ton 1

High Speed Presses

Top

APMC FH2424-40K High Speed Press - New
  • With Mechanical Balancing
  • Machine Bed: 23.6" D x 23.6" W (600 x 600 mm)
  • Cutting Stroke:3.9" (100 mm)
  • Max. Daylight: 4.9" (125 mm)
  • Manual 4 Position Mechanical Stops
  • Hardened and Ground Steel Plate Under the Head
  • Adjustable Self Centering Die Rails
  • Single Automated Slide Table with Mechanical Cushioning Device
  • Inboard Photocell Safety Guard and Rear Fixed Safety Guard

*Note: New machine.


 FH2424-40K 40 Ton 1
             

Hydraulic Clicker Presses

Top

Pedersen 282M-320-16W Hydraulic Clicker Press
  • Manual Die Height Adjustment
  • Polypropylene Cutting Pad
  • Machine Bed: 18" x 36"
  • Striking Plate: 16" W
  • Daylight: 9.375" (on top of a 1" cutting pad)
  • Stroke: adjustable 0 - 2.3" (0-60mm) or 3.5" - 5.9" (90-150mm) but not both




 Pedersen 282M-320-16W 18 Ton 3
Pedersen 282AM-760Z* Hydraulic Clicker Press
  • Manual Die Height Adjustment
  • Polypropylene Cutting Pad
  • Machine Bed: 20" x 40"
  • Beam Width: 30"

***On consignment. Excellent condition. Sold as is. No warranty.***



 PED282AM-760Z 18 Ton 1
Atom MF 9.4 Multiforce Clicker Press
  • Manual Die Height Adjustment
  • Polypropylene Cutting Pad
  • Machine Bed: 20" x 40"
  • Special Light Swing Beam Width: 20"
  • Stroke: 3.5"
  • Max. Daylight: 4.9"

*Note: Available in 20 working days.



 MF 9.4 25 Ton 0
APMC APM-SA8 Hydraulic Clicker Press - New
  • Manual Die Height Adjustment
  • Polypropylene Cutting Pad
  • Machine Bed: 15.7" x 31.5" (400 x 800 mm)
  • Beam Width: 12.6" (320 mm)
  • Power: 220 Volt, Single Phase, 60 Cycle

*Note: New machine.



 New APM-SA8 8 Ton
APMC APM-SA22 Hydraulic Clicker Press - New
  • Auto Die Height Adjustment
  • Polypropylene Cutting Pad
  • Machine Bed: 18" x 36" (430 x 900 mm)
  • Beam Width: 14.6" (370 mm)

*Note: New machine.



 New APM-SA22 22 Ton
APMC APM-SA27 Hydraulic Clicker Press - New
  • Auto Die Height Adjustment
  • Polypropylene Cutting Pad
  • Machine Bed: 20" x 40" (500 x 1000mm)
  • Beam Width: 20" (500 mm)

*Note: New machine.



 New APM-SA27 27 Ton
APMC APM-SA27L Hydraulic Clicker Press - New
  • Auto Die Height Adjustment
  • Polypropylene Cutting Pad
  • Machine Bed: 20" x 40" (500 x 1000mm)
  • Beam Width: 24" (610 mm)

*Note: New machine.



 New APM-SA27L
 27 Ton

Roller Presses

Top

Pedersen 620M-25 96" Wide Roller Press
  • Standard 4 M long tables with the lifting frame

*Note: Available in 14 working days.




 Image Coming Soon 1

Plastic Card Machinery

Top

APMC
SYSCO		 MTL-700MSA Automatic Magnetic Tape Layer-Sheet to Sheet
  • Number of Tape Tracks: 9 pieces (additional tracks available)
  • Sheet Size: 27.5 x 27.5" (700 x700 mm)
  • Tape Laying Device
  • Servo Motor Positioning System
  • Supporting foil Removal and Carrier Rewind Stand
  • Outboard Side Guide
  • Sheet Collection Stand
  • Automatic Sheet Feeder
  • Inboard Gripper Unit With Servo Motor and Ball Screw
  • Automatic Cross Alignment Unit
  • Touch Screen
  • CE Approved Safety Guards
  • Power: 480-Volt, 3-Phase, 60-Cycle (Can be converted to any required Voltage)




 New machine File
Picture from file: New MTL-700NSA With Automatic Sheet Stacker for Finished Sheets		 1
             

Foam Equipment

Top

    60 Ton Cutting On Paper Belt System and Foam Roll Laminator
*Brand new and ready for delivery.*


 Click Here for Details    
             

Other Machinery

Top

FREEMAN T-DOT* Thermal Dot Gluer








Freeman Thermal Dot Gluer 6
Hudson AP-700 Used Automatic Cutting Pad Planer
  • Work Width: 27 ½"
  • Dimensions: 44" D x 51" W x 43" H
  • Net Weight: 2200 lbs. (1000 Kgs)
  • Power: 220 Volt, 3 Phase, 60 Cycle, 40 Amp




 AP-700-Front

AP-700-Back		   1
Blue Line 107VP2* Used Uni-Platen Die Cutter
  • Pree Size: 29 x 41 ½"
  • Fixed Platen: 33 1/8" x 43 3/4" (796 x 1119 mm)
  • Inside Chase Size: 28 3/8" x 41" (721 x 1041 mm)
  • Plate Size: 29 1/2" x 42 1/8" (740 x 1070 mm)
  • Net Weight: 11,200 lbs. (5080 kg)
  • Dimensions: 85" L x 62" W x 54" H (2150 x 1580 x 1360 mm)

*Note: Machine is on Consignment.



 Blue Line

Blue Line

Blue Line		   1
WSK PP 16/6 Semi-Automatic Rotary Table Embossing Machine
  • For manual loading and automatic unloading, indexing table with 6 sections, with 35.4" (900 mm) or 43.3" (1100 mm) diameter, with two air operated embossing units at 10 KN pressure and one hydraulic embossing unit at 60 KN pressure, without embossing heads.
  • Substructure in rugged steel construction
  • Precise 6-section indexing table
  • Driven by gear brake motor
  • Cycle time control
  • Guide pins to locate templates
  • Interchangeable stamping pads
  • Universal adjustable work retainer
  • Material detection by photocell located in front of embossing unit to release embossing action
  • Loading station for manual feeding into templates, markings or other auxiliary devices
  • Embossing unit(s), air operated indirectly, pressure regulator and gauge, precise guide system, stroke fine adjustment, embossing time control, electronic temperature control via sensor, automatic foil feed system with gear brake motor and two rollers, infinitely variable feed length adjustable by potentiometer, winding-up of used foil
  • Embossing unit(s) with direct acting, hydraulic pressure system precise guide system, pressure regulator and gauge, at easy-to-service, separate, hydraulic aggregate, stroke limit adjustment at hydraulic cylinder, embossing time control, electronic temperature control via sensor, automatic foil feed system with gear brake motor and two rollers, infinitely variable feed length adjustable by potentiometer, winding-up of used foil
  • Off-loading system by means of rugged straight linear conveyor, air operated, adjustable suckers, sucker groups, operated by cut-off valve
  • Deposit with adjustable guides
  • Release of cycle foot switch
  • Micro processor control
  • Important operation elements in convenient reach of operator
  • Safety equipment according to present standard regulations
  • Power: 220-Volt, 3-Phase, 60-Cycle




 Used-WSK-PP16/6 1

Leather Working Machinery

Top

Camoga CN-512* Used Leather Splitter
  • Work Width: 19.75"
  • Upper Feed Roller
  • Extra Spare Parts
  • New Blade
  • Power: 220-Volt, 3-Phase, 60-Cycle

***On consignment. Good working condition. Sold as is. No warranty.***







 Camoga

Camoga

Camoga		 1
Antares L500 Used Strap Cutter
  • Working Width: 2 - 500 mm
  • With foot pedal
  • The machine will be upgraded to current factory safety features and will come with ten spacers and knives
  • Power: 220-Volt, 3-Phase, 60-Cycle

Note: Available in 10 working days.


 Image Coming Soon 1
             
Name: 
Email: 
Company: 
Phone Number: 
*Machine is on consignment

Home | Site Map | Contact Us | Used Machines
Die Cutting | Plastic Card | Special Systems | Parts and Service | Die Sharpener | Cutting Pads

Assssociated Pacific Machine Corp.
724 Via Alondra
Camarillo, CA 93012, USA
(805)445-4740 (800)679-APMC