( 0 )

Customer Testimonials

testimonials

I wanted to express my sincere thanks to you for the help in getting the press up and running — Stan Wuertzer
esterline On behalf of CMC Electronics, I would like to sincerely congratulate APM for its outstanding partnership in helping us to perform the upgrade of the APM Clicker in way to reach CSA certification.I must say that APM support was decisive to help us to meet local requirements and production performance, so said you may count with us for future business.On behalf of the CMC Electronics management and staff I wish you all the best in your future projects. — Yours sincerely, Antonio Alves M. Ing.
douglass We have received our new machine and I would like to thank you for the packaging and time efficiency. Can’t wait to get this bad boy fired up. Thanks — Andre Brown
flint The start-up went great and the press is running fine, it cuts through the 2 sheets of hard material with no problem and the edges are very clean. The 200 ton is just what we needed. —
Rob Mantek
Please accept my deep gratitude for helping Hog Liners achieve a very important milestone. You assisted us with technical expertise and equipment rental that helped us meet a critical deadline. We received expert guidance with locating a vendor for our die cutting materials and ultimately arranged for the rental of a machine to do our die-cutting. Very well done and many thanks. — Chet Galland
interstate Thank you for sending Suren to us. He did a terrific job and I am very happy with the results. Have a good weekend. — Ricardo Wilkowski
Bay Rubber I wanted to thank you for prodding me to purchase the cutting system. I had been looking at several different systems over the past three years and this was the first system to offer all the capabilities I was looking for. We knew the system would increase our ability to react to customers and would cut down on our material usage, that’s only the beginning of what this system has done for us. We have had several sales opportunities where customers have come in needing a non-standard gasket or seal in a hurry and as they are describing it to me, I’ve been able to draw it on the screen and cut it before the customer leaves. Or when a customer brought in a complicated oval gasket with 50 holes spread out in and odd pattern. In the past we would have to produce a drawing and send it off to the die maker for a quote, then wait several days for the tooling. We finished the drawing and cut the part, exactly to the pattern, saving the customer both time and money, with spot on accuracy. Our die costs are almost non-existent. This machine is literally another shop person with none of the headaches. Our yields have gone up on every job we produce. The price to the customer stayed the same, while our cost dropped like a rock. With savings like this, the system will pay for itself in 1 ½ years or less. I can see another system in our future, possibly something even bigger. Thank you again for being so persistent. — Sincerely, Tom Mac Kenzie
louis I will like to thank Suren for doing a great job. He gat the two machines back online
after they were setting idle for months. His hard work paid dividends. He was extremely professional and knowledgeable. We appreciate his work and look forward to continue working with him. Again thanks. – Cruz Lozoya
flextech We were faced with a die cutting challenge on a multi layered part made up of foam fabric and plastic. Although we had worked a way of cutting our product using equipment we had in-house, the results were less than desirable and we were wearing out tools as we were using a hard-anvil process. The product reached the point where we needed dedicated equipment, so we turned to Associated Pacific to help us with selecting the proper equipment for the job. We sent them samples of the material we cutting and they were able to work with the material to determine the best method. The professionals at AP determined that we could cut the material using a soft-anvil process which was efficient and effective. AP was able to steer us in the right direction and get us matched up with the right equipment. – Willie Monteiro
Thanks for taking to time to talk. It is always a pleasure to talk and email with everyone at Associated Pacific. For the last 15 years, every experience I have had has been wonderful. Please pass along my continued thanks for such professionalism. Looking forward to another 15 years. Thanks. – Cris Green
Please thank everyone for us here at SGL.Roen, we left in a hurry after Lunch, so I did not have a chance to let you know that your training was excellent and thank you personally. —
Eckehard Fuhrmann
“I would like to thank you for all of your help and technical assistance that you have provided me over the last week. The machine is now operating how it should. I finally did get the control system to set the height with the die attached. I just wanted to thank-you and say that you were a very thorough troubleshooting engineer and you help was very much appreciated. —
Richard Fix
Just wanted to let you guys know that we absolutely love the machine, works great, quiet and is going to be a huge asset to us – Thanks for selling such a nice machine. Thank You —
Rick Wiggins
“Hello Kim, we got our press back last week and got it all set up and working. We are now back to full production and I just wanted to say thank you to you and your crew for helping us. Be sure to let all involved we appreciate your patience and hard work. Thank you — Ron Murray
Now that the project is complete and the machine is up and “producing chips” – I would like to thank you ALL at Associated Pacific for terrific response.Very much appreciated and going forward we will try our best to give enough time so the job can be done without rushing. — Best regards, Sam Art

“We were faced with a die cutting challenge on a multi layered part made up of foam fabric and plastic. Although we had worked a way of cutting our product using equipment we had in-house, the results were less than desirable and we were wearing out tools as we were using a hard-anvil process. The product reached the point where we needed dedicated equipment, so we turned to Associated Pacific to help us with selecting the proper equipment for the job.

We sent them samples of the material we cutting and they were able to work with the material to determine the best method. The professionals at AP determined that we could cut the material using a soft-anvil process which was efficient and effective. AP was able to steer us in the right direction and get us matched up with the right equipment.”

— Best regards, Willie