Fuel tanks (Aircraft)

These are machine(s) that can be used for Fuel tanks applications in the Aircraft industry. If you would like more information about any of these machine(s), select the machine(s) with the checkboxes on the left, fill out the form below and submit. You will receive a response as soon as possible. Thanks!

		FH 3563-60(IncrementalFeed) - A 60-ton four-pillar press with 10 foot long inboard and outboard table stands. The machine can be configured for three different styles of cutting. The first way the machine can cut is by using a long die board with blade up and material on top. The cutting pad is in the head of the press. Also, the machine can have a die mounted in the head and material on a long cutting pad. In a special configuration, the machine can have a long pad, material on top of the pad and loose dies on top of the material. In all three configurations, the material is advanced step by step and cut.
		HBC 100(IncrementalFeed) - A 100 ton four pillar press with a 35” X 63” table size. Multiple plies of material or planks can be placed on the incremental slide table with a cutting pad. The cutting die is attached under the beam. The table moves step by step through the cutting area. Cut parts can be removed at the entry or exit side of the press. Alternatively, a long steel rule die can be placed on the incremental table and multiple pieces of material are placed on the die. The cutting pad (and pad shifter) is mounted under the beam. The table, die and material move step by step through the cutting area. This type of incremental feed system is used to cut automotive trim, furniture components, etc.

Name:
Email Address:
Company:
Phone Number:
Country:
Project Description: