Disposable Clothing (Clothing)

These are machine(s) that can be used for Disposable Clothing applications in the Clothing industry. If you would like more information about any of these machine(s), select the machine(s) with the checkboxes on the left, fill out the form below and submit. You will receive a response as soon as possible. Thanks!

		HBC 100(IncrementalFeed) - A 100 ton four pillar press with a 35” X 63” table size. Multiple plies of material or planks can be placed on the incremental slide table with a cutting pad. The cutting die is attached under the beam. The table moves step by step through the cutting area. Cut parts can be removed at the entry or exit side of the press. Alternatively, a long steel rule die can be placed on the incremental table and multiple pieces of material are placed on the die. The cutting pad (and pad shifter) is mounted under the beam. The table, die and material move step by step through the cutting area. This type of incremental feed system is used to cut automotive trim, furniture components, etc.
		USA Traveling Head - The traveling head press is used to cut man made material that comes on rolls. The width can vary from 60” to over 100”. The bed depth generally runs from 20” to 30”. Larger machines can be provided to meet customer’s needs. The depth of the head is usually the same as the bed depth. The width of the head is normally the same as the depth. There are exceptions where it can be wider or narrower. The die should be smaller then the head of the press. The amount of cutting rule should be within the capacity of the machine. The cutting force can be from 20 to 150 tons. Different feed systems are available to assist the operator.

Name:
Email Address:
Company:
Phone Number:
Country:
Project Description: