Foam Toys (Toys Games and Sports)

These are machine(s) that can be used for Foam Toys applications in the Toys Games and Sports industry. If you would like more information about any of these machine(s), select the machine(s) with the checkboxes on the left, fill out the form below and submit. You will receive a response as soon as possible. Thanks!

		FH 3563-100(FoamCutting) - 100 ton, 4 pillar full head press with inboard and outboard conveyors and pinch rolls cutting against a 60RC hardened and ground steel plate with an optional pad and pad shifter. Our most popular and versatile full head press for cutting both roll goods and sheet goods. The German made steel plate has a low friction co-efficiency so most materials will slide across the surface. Add a photocell to activate the first cutting stroke and this is a virtually non-stop automated diecutter with high productivity for sheets or rolls.
		Four Pillar Full Head Hydraulic Presses 25-30 Ton Models - The four pillar full head press is the centerpiece for many automatic cutting systems. It also plays a big role in simple manual operations as well. The full head press in its simple form with a hand slide table is used to cut material from sheets. The dies can be hand placed, mounted to the bridge, or on the table blade up. In the first two cases, the cutting pad is on the slide table of the press. The material to be cut is placed on the cutting pad. The cutting dies are placed on top of the material. The bridge then pushes the dies through the material from the top. In the third case, the die is on the table cutting edge up. This way it does not have to be handled if it is large and heavy. The material to be cut goes on top of the die. The pad is mounted to the bridge. In general one cuts large parts with large dies out of sheets of material. The press should be big enough for the dies and have enough cutting force. Various feed systems can be adapted to the presses as well as pad shifting devices.
		Four Pillar Hydraulic Die Cutting Presses 40-200 Ton Models - The four pillar full head press is the centerpiece for many automatic cutting systems. It also plays a big role in simple manual operations as well. The full head press in its simple form with a hand slide table is used to cut material from sheets. The dies can be hand placed, mounted to the bridge, or on the table blade up. In the first two cases, the cutting pad is on the slide table of the press. The material to be cut is placed on the cutting pad. The cutting dies are placed on top of the material. The bridge then pushes the dies through the material from the top. In the third case, the die is on the table cutting edge up. This way it does not have to be handled if it is large and heavy. The material to be cut goes on top of the die. The pad is mounted to the bridge. In general one cuts large parts with large dies out of sheets of material. The press should be big enough for the dies and have enough cutting force. Various feed systems can be adapted to the presses as well as pad shifting devices.
		HBC 100 (Cutting against hardened and ground steel plate and or poly pad and pad shifter) - 100 ton, 4 pillar full head press with inboard and outboard conveyors and pinch rolls cutting against a 60RC hardened and ground steel plate with an optional pad and pad shifter. Our most popular and versatile full head press for cutting both roll goods and sheet goods. The German made steel plate has a low friction co-efficiency so most materials will slide across the surface. Add a photocell to activate the first cutting stroke and this is a virtually non-stop automated diecutter with high productivity for sheets or rolls.
		USA Traveling Head - The traveling head press is used to cut man made material that comes on rolls. The width can vary from 60” to over 100”. The bed depth generally runs from 20” to 30”. Larger machines can be provided to meet customer’s needs. The depth of the head is usually the same as the bed depth. The width of the head is normally the same as the depth. There are exceptions where it can be wider or narrower. The die should be smaller then the head of the press. The amount of cutting rule should be within the capacity of the machine. The cutting force can be from 20 to 150 tons. Different feed systems are available to assist the operator.

Name:
Email Address:
Company:
Phone Number:
Country:
Project Description: